Wielokanałowy generator sygnałowy MFG-2120MA 20MHz ARB/Impuls/Modulacja/Wzmacniacz

3 075,00  (2 500,00  netto)

Najniższa cena w ciągu 30 dni: 2 500,00  netto

Features
  • Maximum Five Output Channels
  • - 2 Equivalent Performance Arbitrary Channels Frequency : 1Hz~10/20/30/60MHz
  • - RF Channel Frequency (FG/ARB/MOD) : 160/320MHz
  • - Pulse Generator Frequency : 25MHz
  • - Power Amplifier : Low Frequency, 100kHz, Output 20W
  • True Point by Point Output Arbitrary Waveform Function : 200MSa/s,
  • 100MHz Repetition Rate, 14-bit Resolution,16k Point Memory Depth
  • Earth Ground Isolation Design Among I/O Terminals and Instrument Chassis
  • Frequency Counter : 150MHz, 8 bits
  • AM/FM/PM/ASK/FSK/PSK/SUM/PWM Modulation
  • USB Host/USB Device/LAN (MFG-22XX only)
  • 4.3 Inch TFT Color Display

Multi-channel signal outputs to satisfy your diversified signal requirements

GW Instek launches the brand new MFG-2000 series multi-channel function generator, including MFG-21XX entry-level models and MFG-22XX advanced models. The output channels of MFG-21XX models include one single-channel 10M/20M/30M/60MHz ARB generator ; one 25MHz pulse generator  ; one 160MHz or 320MHz RF signal generator (MFG-2160MF/MFG-2160MR) and one power amplifier (MFG-2120MA only)?MFG-22XX models include one 30MHz/60MHz dual performance ARB generator ; one 25MHzpulse generator ; one 160MHz or 320MHz RF signal generator (MFG-2260MFA/MFG-2260MRA) ; and one power amplifier (MFG-2260MFA/MFG-2260MRA only).

MFG-2000 series, which has up to 5 simultaneous output channels (MFG-2260MFA/MFG-2260MRA), including CH1 and CH2 equivalent performance dual channel arbitrary function generator with the maximum 60MHz for both channels; RF signal generator, a standard AFG, which produces the maximum 320MHz sine wave and various modulation RF signals; pulse generator, whose frequency reaches 25MHz; power amplifier, which is ideal for audio range. The above-mentioned five different functionality channels are separately or totally allocated on 10 models, which extend from the basic single-channel AFG with pulse generator models to five-channel models so as to satisfy various educational and industrial applications.

The AFG channel of the MFG-2000 series outputs sine, square, and triangle, etc. The series features true point-by-point output arbitrary waveform characteristics of 200 MHz sample rate, 100MHz waveform repetition rate, 14 bit resolution, and 16k point memory depth. Some models provide various modulation methods such as AM/FM/PM/FSK/PWM, Sweep, Burst, Trigger, 150MHz Frequency Counter. Synchronized dual channel models provide correlated functions, including synchronization, delay, sum, and coupling. RF signal generator, a complete AFG signal source (including ARB), features various modulations, Sweep, and digital modulations such as ASK and PSK and its sine wave frequency is up to 320MHz. A full-function pulse generator with 25 MHz is equipped to all models and its pulse width, rise edge time, fall edge time are adjustable that can be applied as trigger signals. Independent input/output power amplifier with 20W, 10dB, DC-100KHz bandwidth, and distortion less than 0.1% can be applied to the audio application.

 

Isolated Channel Design The overall design of the MFG-2000 series is earth ground isolation among output/input terminals and instrument chassis that can only be found in high-level signal sources. The output channels can sustain maximum isolation voltage up to ±42Vpk (DC+ AC peak value) to earth ground that is ideal for floating circuit tests. Multi-unit outputs can be executed without factoring in grounding reference issue. There is no additional isolation requirement for experiments such as “full-wave rectification” and “voltage doubler” which are easy and safe. An external power supply can bring up the DC bias voltage to ±42Vpk to meet the requirements of higher DC bias voltage such as automotive and educational applications.

 

Arbitrary Waveform Editing Software The AFG of the MFG-2000 series collocating with AWES (Arbitrary Waveform Editing Software) allows users to easily and quickly edit arbitrary waveforms. DWR (Direct Waveform Reconstruction) allows users to collocate with GDS series digital oscilloscopes to retrieve waveforms and upload them to arbitrary generator to achieve direct waveform reconstruction. 66 built-in waveforms allow users to edit arbitrary waveforms and to output the whole segment or divided segments.

 

Satisfied various application With the multi-functionality channels, the MFG-2000 series provides different industrial sectors with special dual channel waveforms, IQ modulation signals, low-frequency vibration simulation, automotive sensors, AM/FM broadcast signals, PWM motor or fan control signals, pulse synchronized signals, pulse noise, audio circuit or devices such as speaker tests. The series is ideal for various fields, including scientific research, education, research and development, production and quality control.

 

More details, please follow MFG-2000 Brochure.

 

Product model selection
The entire MFG-2000 series has 10 models. The specific functions for each model are as follows:
MFG-2000 series specific functions
  CH1 CH2 25MHz Pulse Generator RF Generator (Function With ARB) Power Amplifier Modulation/Sweep /Burst/ Frequency Counter
Function With ARB Function With ARB
MFG-2110 ?10MHZ   ?      
MFG-2120 ?20MHZ   ?      
MFG-2120MA ?20MHZ   ?   ? ?
MFG-2130M ?30MHZ   ?     ?
MFG-2160MF ?60MHZ   ? ?160MHZ   ?
MFG-2160MR ?60MHZ   ? ?320MHZ   ?
MFG-2230M ?30MHZ ?30MHZ ?     ?
MFG-2260M ?60MHZ ?60MHZ ?     ?
MFG-2260MFA ?60MHZ ?60MHZ ? ?160MHZ ? ?
MFG-2260MRA ?60MHZ ?60MHZ ? ?320MHZ ? ?
  The MFG-2000 series can maximally and simultaneously output five functional channels. The functionalities of each channel are as follows:
Channel 1 1uHz-60MHz max. FG With 200MSa/s ARB AM ,FM ,PM,FSK PWM ,Sweep ,Burst , Trigger, Frequency Counter  
Channel 2  
RF Channel 1uHz-320MHz max. FG With 200MSa/s ARB ASK,PSK
Pulse Generator 25MHz Full Function pulse Generator (Frequency /Width/duty Cycle /Rise and Fall Edge adjustable
Power Amplifier 20W Power Amplifier (20W (RL=8Ω)/20dB/DC-100kHz/<0.1% (Ampl >1Vpp 20Hz~20kHz
Detail of MFG-2000 Specifications.
 
CH1/ CH2  
Arbitrary Functions      
  ARB function Built-in
  Sample Rate 200 MSa/s
  Repetition Rate 100MHz
  Waveform Length 16k points
  Amplitude Resolution 14 bits
  Non-Volatile Memory 10sets 16k points(1)
  User-defined output section From point 2~16384
  User-defined output marker section From point 2 ~ 16384
  Output mode 1~1048575 cycles or infinite mode
Frequency Characteristics      
  Range Sine 60MHz(max)
    Square 25MHz(max)
    Triangle, Ramp 1MHz
  Resolution   1μHz
  AccuracyStability ±20 ppm
  Aging ±1 ppm, per 1 year
  Tolerance ≤1μHz
Output Characteristics(2)      
  AmplitudeRange 1mVpp to 10 Vpp (into 50Ω) 2mVpp to 20 Vpp (open-circuit)
  Accuracy ±2% of setting ±1 mVpp (at 1 kHz/into 50Ω without DC offset))
  Resolution 0.1mV or 4 digits
  Flatness ± 1%  (0.1dB)  ?1MHz ± 3% (0.3dB)  ?50 MHz ± 10% (0.9dB)   ?160MHz ± 30% (3dB)   ?320MHz (sinewave relative to 1 kHz/into 50Ω)
  Units Vpp, Vrms, dBm
Offset Range ±5 Vpk ac +dc (into 50Ω) ±10Vpk ac +dc (Open circuit)
  Accuracy 1% of setting + 5mV+ 0.5% of amplitude
Waveform Output Impedance 50Ω typical (fixed) > 10MΩ (output disabled)
  Protection Short-circuit protected Overload relay automatically disables main output
  Ground Isolation 42Vpk max
Sync Output Range TTL-compatible into>1kΩ
  Impedance 50Ω standard
  Ground Isolation 42Vpk max
Sine wave Characteristics(3)    
  Harmonic distortion –60 dBc   DC?200kHz, Ampl>0.1 Vpp –55 dBc   200kHz?1 MHz, Ampl>0.1 Vpp –45 dBc   1MHz?10 MHz, Ampl?0.1Vpp –30 dBc   10MHz?320MHz, Ampl?0.1Vpp
  Total harmonic distortion < 0.1% (Ampl>1Vpp)DC~100 kHz
Square wave Characteristics    
  Rise/Fall Time <15ns
  Overshoot <5%
  Asymmetry 1% of period +5 ns
  Variable duty Cycle 0.01% to 99.99%(limited by the current frequency setting)
  Jitter 20ppm+500ps(4)
Ramp Characteristics      
  Linearity < 0.1% of peak output
  Variable Symmetry 0% to 100%
Pulse Characteristics    
  Frequency 1uHz~25MHz
  Pulse Width ?20nS(limited by the current frequency setting)
  Variable duty Cycle 0.01%~99.99%(limited by the current frequency setting)
  Overshoot <5%
  Jitter 20ppm +500ps(4)
Pulse Generator    
  Amplitude 1mVpp to 2.5 Vpp (into 50Ω) 2mVpp to 5 Vpp (open-circuit)
  Offset ±1 Vpk ac +dc (into 50Ω) ±2Vpk ac +dc (Open circuit)
  Frequency 1uHz~25MHz
  Pulse Width 20nS~999.9ks(limited by the current frequency setting)
  Variable duty Cycle 0.01%~99.99%(limited by the current frequency setting)
  Leading and Trailing Edge Time(5) 10nS~20S(1ns resolution) (limited by the current frequency and pulse width settings)
  Overshoot <5%
  Jitter 100ppm +500ps(4)
RF Generator    
Arbitrary Functions      
  ARB function Built-in
  Sample Rate 200 MSa/s
  Repetition Rate 100MHz
  Waveform Length 16k points
  Amplitude Resolution 14 bits
  User-defined output section From point 2~16384 (optional)
  Jitter 20ppm +5ns
Frequency Characteristics      
  Range Sine
1uHz~160MHz(MFG-2XXXMF)
1uHz~320MHz(MFG-2XXXMR)
 
    Square 25MHz(max)
    Triangle, Ramp 1MHz
  Resolution   1μHz
  AccuracyStability ±20 ppm
  Aging ±1 ppm, per 1 year
  Tolerance ≤1μHz
Output Characteristics(2)      
  Amplitude(into 50Ω) 1mVpp to 2 Vpp  (MFG-2XXXMF) 1mVpp to 1 Vpp  (MFG-2XXXMR)
  Accuracy ±2% of setting ±1 mVpp (at 1 kHz/into 50Ω without DC offset))
  Resolution 0.1mV or 4 digits
  Flatness ± 1%  (0.1dB)  ?1MHz ± 3% (0.3dB)  ?50 MHz ± 10% (0.9dB)   ?160MHz ± 30% (3dB)   ?320MHz (sinewave relative to 1 kHz/into 50Ω)
Offset   ±1 Vpk ac +dc (into 50Ω) ±2Vpk ac +dc (Open circuit)
Waveform Output Impedance 50Ω typical (fixed) > 10MΩ (output disabled)
Sine wave Characteristics(3)    
  Harmonic distortion –60 dBc   DC?200kHz, Ampl>0.1 Vpp –55 dBc   200kHz?1 MHz, Ampl>0.1 Vpp –45 dBc   1MHz?10 MHz, Ampl?0.1Vpp –30 dBc   10MHz?320MHz, Ampl?0.1Vpp
  Total harmonic distortion < 0.1% (Ampl>1Vpp)DC~100 kHz
Square wave Characteristics    
  Rise/Fall Time <15ns
  Overshoot <5%
  Asymmetry 1% of period +5 ns
  Variable duty Cycle 0.01% to 99.99%(limited by the current frequency setting)
  Jitter 20ppm+500ps(4)
Ramp Characteristics      
  Linearity < 0.1% of peak output
  Variable Symmetry 0% to 100%
Modulati0n/Sweep    
  Modulation Type AM,FM,PM,FSK,PWM (The detail same as CH1 modulation specification)
  Sweep type Frequency
  Source INT/EXT?INT only for AM,FM,PM, PWM)
PSK    
  Carrier Waveforms Sine, Square, Triangle, Ramp, Pulse
  Modulating Waveforms 50% duty cycle square
  Internal Frequency 2mHz to 1 MHz
  Phase Range 0?~360.0?
  Source Internal / External
ASK    
  Carrier Waveforms Sine, Square, Triangle, Ramp, Pulse
  Modulating Waveforms 50% duty cycle square
  Internal Frequency 2mHz to 1 MHz
  AmplitudeRange 0%~100.0%
  Source Internal / External
Power Amplifier    
  Input Impedance 10KΩ
  Input voltage 1.25Vpmax
  Working Mode Constant Voltage
  Gain 20dB
  Output Power ?RL=8Ω? 20W(Square?
  Output Voltage 12.5Vpmax
  Output Current 1.6Amax
  Rise/Fall Time <2.5uS
  Full Power Bandwidth DC-100KHz
  Overshoot 5%
  Total harmonic distortion < 0.1% (Ampl>1Vpp) 20Hz~20 kHz
  Ground Isolation 42Vpk max
Advanced Functions    
AM Modulation    
  Carrier Waveforms Sine, Square, Triangle, Ramp, Pulse, Arb
  Modulating Waveforms Sine, Square, Triangle,Upramp, Dnramp
  Modulating Frequency 2mHz to 20kHz (Int)DC to 20kHz (Ext)
  Depth 0% to 120.0%
  Source Internal / External
FM Modulation      
  Carrier Waveforms Sine, Square, Triangle, Ramp
  Modulating Waveforms Sine, Square, Triangle,Upramp, Dnramp
  Modulating Frequency 2mHz to 20kHz (Int) DC to 20kHz (Ext)
  Peak Deviation DC to max frequency  
  Source Internal / External
PM    
  Carrier Waveforms Sine, Square, Triangle, Ramp
  Modulating Waveforms Sine, Square, Triangle, Upramp, Dnramp
  Modulation Frequency 2mHz to 20kHz (Int) DC to 20kHz (Ext)
  Phase deviation 0?~360.0?
  Source Internal / External
SUM    
  Carrier Waveforms Sine, Square, Triangle, Ramp
  Modulating Waveforms Sine, Square, Triangle, Upramp, Dnramp
  Modulation Frequency 2mHz to 20kHz (Int) DC to 20kHz (Ext)
  SUM depth 0%~100.0%
  Source Internal / External
PWM    
  Carrier Waveforms Sine, Square, Triangle, Ramp
  Modulating Waveforms Sine, Square, Triangle, Upramp, Dnramp
  Modulation Frequency 2mHz to 20kHz (Int) DC to 20kHz (Ext)
  Phase deviation 0%~100.0% pulse width
  Source Internal / External
FSK    
  Carrier Waveforms Sine, Square, Triangle, Ramp, Pulse
  Modulating Waveforms 50% duty cycle square
  Internal Frequency 2mHz to 1 MHz
  FrequencyRange 1μHz to max frequency
  Source Internal / External
Sweep      
  Waveforms Sine, Square, Triangle, Ramp
  Type Linear or Logarithmic
  Sweep direction Sweep up or sweep down
  Start/Stop Freq 1uHz to max frquency
  Sweep Time 1ms to 500s
  Source Internal / External
  Trigger Single, External, Internal.
  Marker Marker signal on falling edge(programmable)
  Source Internal / External
Burst    
  Waveforms Sine, Square, Triangle, Ramp
  Frequency 1uHz~Max Frequency
  Pulse count 1~1000000 Cycles or intfinite
  Start/ Stop Phase -360.0?~+360.0?
  Internal Frequency 1 us~500 s
  Gate source External Trigger
  Trigger Source Single, External, Internal.
Trigger Delay NCycle, Infinite 0s~100 s
External Trigger Input      
  Type For FSK, Burst, Sweep
  Input Level TTL Compatibility
  Slope Rising or Falling(Selectable)
  Pulse Width >100ns
  Input Impedance 10kΩ?DC coupled
External Modulation Input      
  Type For AM, FM, PM,SUM,PWM
  Voltage Range ±5V full scale
  Input Impedance 10kΩ
  Frequency DC to 20kHz
  Ground Isolation 42Vpk max
Trigger Output      
  Type For FSK,Burst, Sweep
  Level TTL Compatible into 50Ω
  Pulse Width >450ns
  Maximum Rate 1MHz
  Fan-out ≥4 TTL Load
  Impedance 50Ω Typical
Frequency Counter      
  Range 5Hz to 150MHz
  Accuracy Time Base accuracy±1count
  Time Base ±20ppm (23?C ±5?C)
  Resolution The maximum resolution is: 100nHz for 1Hz, 0.1Hz for 100MHz.
  Input Impedance 1kΩ/1pf
  Sensitivity 35mVrms ~ 30Vms (5Hz to 150MHz)
  Ground Isolation 42Vpk max
Dual Channel Function(CH1/CH2)      
  Phase -180? ~180?
    Synchronize phase
  Track CH2=CH1
  Coupling Frequency(Ratio or Difference)
    Amplitude & DC Offset
  Dsolink
Save/Recall   10 Groups of Setting Memories
Interface   LAN, USB
Display   4.3’’ TFT LCD 480 × 3 (RGB) × 272
General Specifications    
  Power Source AC100~240V, 50~60Hz or AC100~120V, AC220~240V, 50~60Hz
  Power Consumption 30W or 80W(With power amplifier)
  Operating Environment Temperature to satisfy the specification :  18 ~ 28?C Operating temperature : 0 ~ 40?C Relative Humidity: ≤   80%, 0 ~ 40?C ≤   70%, 35 ~ 40?C Installation category? CAT II
  Operating Altitude 2000 Meters
  Pollution Degree IEC 61010  degree 2, Indoor use
  Storage Temperature -10~70?C, Humidity: ≤70%
  Dimensions (WxHxD) 266(W) x 107(H) x 293(D) mm
  Weight Approx. 2.5kg
  Safety designed to EN61010-1
  Accessories GTL-101× 1(MFG-21XX) GTL-101× 2(MFG-22XX)
    Quick Start Guide ×1 CD (user manual + software) ×1 Power cord×1
(1). A total of ten waveforms can be stored. (Every waveform can be composed of a maximum of 16k points.) (2). Add 1/10th of output amplitude and offset specification per ºC for operation outside of 0ºC to 28ºC range (1-year specification). (3). DC offset set to zero, (4). Jitter specification for RF Generator: 20ppm +5ns. (5).Only Pulse channel support
Dostepne modele:
MFG-2110 10MHz Single channel Arbitrary Function Generator with pulse generator
MFG-2120 20MHz Single channel Arbitrary Function Generator with pulse generator
MFG-2120MA 20MHz Single channel Arbitrary Function Generator with pulse generator, modulation, power amplifier
MFG-2130M 30MHz Single channel Arbitrary Function Generator with pulse generator, modulation
MFG-2160MF 60MHz Single channel Arbitrary Function Generator with pulse generator, modulation, 160MHz RF signal generator
MFG-2160MR 60MHz Single channel Arbitrary Function Generator with pulse generator, modulation, 320MHz RF signal generator
MFG-2230M 30MHz Dual channel Arbitrary Function Generator with pulse generator, modulation
MFG-2260M 60MHz Dual channel Arbitrary Function Generator with pulse generator, modulation
MFG-2260MFA 60MHz Dual channel Arbitrary Function Generator with pulse generator, modulation, 160MHz RF signal generator, power amplifier
MFG-2260MRA 60MHz Dual channel Arbitrary Function Generator with pulse generator, modulation, 320MHz RF signal generator, power amplifier
 

Zapytaj o produkt

Nasi sprzedawcy pomogą Państwu dobrać odpowiednią aparaturę.

    Formularz kontaktowy



    Sprawdź też

    Ostatnio oglądałeś

    Zarejestruj miernik kupiony w Merazet i odbierz 10% zniżki na wzorcowanie!

    Rejestruję miernik

    Profesjonalna aparatura

    Serwis i kalibracja

    Prezentacje

    Wypożyczenia na testy

    Leasing i raty

    Solidny partner

    Zaufali nam:

    Zaufali nam klienci instytucjonalni, firmy przemysłowe, laboratoria, oraz klienci indywidualni. Między innymi firmy

    Schowek